Congrats to my brother and sister-in-law who closed on their first house this past weekend! Welcome to the wonderful (and sometimes overwhelming) world of home ownership! š
We spent this weekend giving their new house a face-lift with fresh coats of paint throughout the interior. And I must say, after alot of prep work and elbow grease… it Ā looks mighty spiffy!
What perfect timing that Sherwin Williams was running a 40% off sale over the weekend?! We stocked up on everything needed for a successful painting weekend, including the complimentary coffee from their Keurig station. Thanks, Sherwin!
Not sure about everywhere else, but in the Little Rock area at least the sale runs through the 22nd. So if you need a new splash of color or some “purdy” great supplies, run on by today and save a buck or fifty!
.JPG)
To cover over existing wall colors quickly, we went with the “Super Paint” 2 in 1 coverage recommended by the SW specialists. This was my first time working with this particular SW product, and I must say I was impressed with how it covered. We were able to cover over the existing gold, blue, and pink walls with one coat in every room!
Here was the final line up of paints that completed our neutral interior color palette. Taking the 8′ ceilings and amount of natural light available into account, I made sure to stay on the lighter end of the fan deck to allow margin for the colors to appear slightly darker once applied. The main goal was to make the space feel more open throughout. Mission accomplished! I was quite happy with the results and I think our new homeowners wholeheartedly agree. š
Hope you all had a wonderful weekend. Here’s to a happy Monday and fresh starts all around!
(
(
(
(
(
(
(
(
(
(
(
.jpg)
(
… while was waiting for my bench to dry, I worked on recovering the bench seat.
Step 1: Flip over and start pulling up the old fabric from the corners. Work your way around ripping up the fabric. Use scissors, pliers, or whatever tools needed to destroy any stubborn fabric refusing to surrender.
If there is another fabric layer discovered (like I’ve found on most of the treasures I pick up) simply repeat the stripping process until you uncover the actual “fluff” of the cushion. It should look something like the stripped cushion above.
Step 3: To add a little extra substance to your cushion, unroll a piece of quilting batting, lay the seat cushion and existing fluff face down on the batting, and cut out a piece of batting around with with about a 2 inch margin for wrapping around. Starting with the corners, wrap the batting tight around the edge and staple into place. Trim any excess batting.
Covered with a layer of batting, the seat should look something like this.
Step 4: Roll out your new fabric of choice, face down, over a flat clean surface. Place your batting covered seat cushion face down on the portion of the fabric you want to use. Depending on the pattern, you may want to hold in place and flip over to line up or center the pattern on the seat. (I chose a solid white linen I had extra yardage of from another project.) Cut out your fabric around the seat cushion, with a 3-4 inch margin to give you wiggle room to adjust the pattern placement. Trim off any excess fabric.
Step 5: Similar to step 3, pull tight, wrap the fabric around the edge, and staple in to place. Begin with a corner, follow with the corner diagonally across from it. Then the third corner, then the last corner diagonally across from it. Picture stretching an artist canvas – you want it pretty tight! Then fill in with as many staples as needed along the edges to hold tight and not pucker. It should now look something like the seat cushion above
Step 6: This was a total experiment. I wanted to do an insert border of grosgrain ribbon, without cutting, sewing, etc. I would have normally tried ironing it on with Stitch Witchery, but alas, all I had in my cabinet at the moment was Liquid Stitch. (Which was also a total experiment.) I laid out the ribbon where I wanted it, pulling tight, pinning, and pleating to turn corners as I went. Once it was all laid out, I went back and turned up the edges to squeeze the glue under. I removed the fabric pins after the glue had set but was not completely dry.
Step 7: Once the seat cushion and the bench base had both dried enough to handle, they were finally reunited!
I started with this sad little bench that I picked up for $10 at an estate sale a couple months ago.
It was the perfect little bonus piece I needed to fill an empty space in the kitchen to serve as extra pull-up seating, a surface for the purses that get tossed or a shield for the shoes that get kicked off.
It had potential… just needed a little TLC.
Step 1: Detach the top from the base, in this case by unscrewing the screw in each corner underneath the bench with a flat-head screwdriver.
Step 2: Prep the “splash zone” for painting. I layered plastic trash bags over my patio table.
Step 3a: Assemble the troops. Liquid sander and applicator (rag or paper towels), paint of choice (with corresponding paint tools) and disposable gloves for the splash-inclined like myself.
Step 3b: Station your trusty guard dog is at his post to keep an eye on things and keep you company. This step is not required, but recommended for a more enjoyable painting experience.
Step 5: PAINT! Ā (Prime first if needed. I didn’t in this case as I planned on two coats of thick paint, so the first coat was like my primer.)Ā I used a high-gloss oil base paint from Sherwin Williams (color: SW 6938 Synergy) as it was a color I had on hand and had used elsewhere in the kitchen. Oil base is harder to work with and takes longer to dry… but it sure is pretty. For easier clean-up and faster dry-time, I’d recommend latex paint or even spray paint if they have the color you need.
Step 6: Wait. Follow the dry-time instructions for whichever paint you use. I let the first coat dry overnight, and put a second coat on the next day.
.JPG)
